Split heads

The split heads make it possible to carry out operations with pump units in the number of up to 3 (type 1) or 6 (type 2). In case of fewer number of pump units the posts not used at the moment are sealed with plugs. The split heads are designed and manufactured according to the requirements specification of the Customer.

Specifications pdf (336 KB)
  • Central flange port area, mm (in): 80 (3 1/8), 100 (Д 1/16), 130 (5 1/8);
  • Side flanges port area, mm (in): 52 (2 1/16), 65 (2 9/16), 80 (3 1/8), 100 (Д 1/16);
  • Operating pressure, MPa (psi): 70 (10000), 105 (15000);
  • Working medium: water, oil, oil products, alkali, inhibited acid solutions, propane, cement and clay solutions;
  • Climate version MCC under GOST 15150-69;
  • Placement category I under GOST 15150-69;
  • Ambient temperature -60°С to +40°С;
  • Corrosion-proof design: non-corrosive, corrosive К1 and К2.
Basic specifications
  • Central flange port area, mm (in): 80 (3 1/8), 100 (Д 1/16), 130 (5 1/8);
  • Side flanges port area, mm (in): 52 (2 1/16), 65 (2 9/16), 80 (3 1/8), 100 (Д 1/16);
  • Operating pressure, MPa (psi): 70 (10000), 105 (15000);
  • Working medium: water, oil, oil products, alkali, inhibited acid solutions, propane, cement and clay solutions;
  • Climate version MCC under GOST 15150-69;
  • Placement category I under GOST 15150-69;
  • Ambient temperature -60°С to +40°С;
  • Corrosion-proof design: non-corrosive, corrosive К1 and К2.